ADV 508-HR sheet metal deburring machine for heavy slag removal
For deburring the edges and holes of the workpiece,this equipment is equipped with 1 set of cleaning hammer or sand block structure,As an option, the machine can have a wide belt grinding head behind the H station for edge breaking and further deburring.
ADV 508-HR metal deburring machine fast removal of heavy slag
>About ADV 508-HR metal deburring machine fast removal of heavy slag, application plasma and flame cut steel,please tell us your material max width, then we can recommend the suitable size to you.
R station: Remove oxide layer, deburr and fine surface grinding
H station, when use the hammer, it can remove the heavy slag, normally use for plasma cutting or flame cutting which have heavy slag. One time can remove slag on 5mm.
S station, when use the sand block, it can achieve the edges rounding function
Machine Photos
HR combinations that can be customized according to customer requirements
(H=hammer, R=sand belt, S=sand block, W=rotary brush)
Why should metal drooss be removed?
* The slag does not contribute to the strength and protection of the metal, but is rather a form of waste.
* The slag formation does not look attractive nor professional from an aesthetic point of view.
* The metal slag makes it difficult to apply an adhesive coating to the surface.
Deburring samples
