Swing Arm Manual Slag Removal Deburring Machine with Vacuum Adsorption Table

ADV 508-M300 is suitable for small batch parts deburring and edge rounding. It has much better working efficiency, and more consistent performance than traditional hand held angle grinder or orbital sander.
This versatile machine has two heads, an easy to change polishing pad and disc brush. The different kind brushes could take care of deburring, edge rounding, finishing, laser oxide removal and heavy slag removal. Also, mirror finish can be created if required.
With the 180 degrees rotating shaft is it easy to rapid switching between different consumables. And then lock it.
The working table also has partial vacuum area for accommodating small parts. Simply position the parts on the vacuum area, then the strong downdraft force will firmly hold the parts in place.

tag: Deburring, Edge Rounding, Finishing.

Machine Photos

332 (2).jpg

Manual deburring, edge rounding and finishing of metal.

It does a fantastic job on deburring and edge rounding of laser cutting, punching, stamping, and some flat machined parts.

Polishing pad/disc brush

ADV 508-M is equipped with dual abrasive pad and disc brush configuration which were driven by the same motor.

Small batch parts deburring, edge rounding, finishing.

Very small parts can be machined due to the use of a vacuum table

With dust-cleaning and vacuum adsorption function

Large hole dust-cleaning area, small hole vacuum area.

Machine Parameters

Product name	Flexible swing arm deburring and edge rounding machine with vacuum working
Vacuum area	300*300 mm
Working head power	0.75 kw
Number of heads	2
Head types	Disc brush/polishing pad
Dust extraction capacity required	1000m3/h
Swing arm span	1500 mm*360°
Maximum part dimension	1300*800 mm
Available thickness range	1-150 mm
Total power	4.5 kw