ADV 508-RY sheet metal deburring machine for precision stamping parts
In any cutting, drilling, laser, mill, and other machining processes, burrs, hot slag, and scum will be produced at the edge of the workpiece, so it is particularly important to choose the correct deburring machine.
The ADV 508-RY model is designed to deburr and large edge round for products in one pass by combining the abrasive belt and disc brushes.At the same time, the cost of consumables is low and the service life is long.
The standard available width is 630mm, 800mm, 1000mm, 1100mm, 1300mm, 1400mm, or customized.
The deburring machine can process parts with a minimum size of 30mm*30mm(with a vacuum or magnetic table).
ADV 508-RY metal deburring machine with disc brush
About ADV 508-RY metal deburring machine with disc brush, application punched, laser, plasma and oxy fuel cut parts, please tell us your material max width, then we can recommend the suitable size to you.
Oxide Layer Removal
Oxide skin occurs on metal and stainless steel when laser cutting, and it must be removed for subsequent coating processes or welding.
Large edge rounding
The Disc brush head which consists out of 5-12 pcs deburring brushes which rotate and oscillate against each other can create a large rounding and nice finish.
Machine Photos
More RY combinations:
1. Pneumatically controlled eccentric sanding roller, which can be lifted and lowered independently. When equipment fails, all sanding rollers automatic lifting to protect the material from damage;
2.Special customized type tensioning cylinder with a large bore and high stability;
3.Independent bearing hanging plate, easy to adjust;
4.Automatic thickness measurement function, automatically locate the thickness of the plate;
5.Damping belt deviation knob, adjust the deviation of the belt, the operation is simple and convenient.
6.The deburring machine can be used in the wet process or dry process.
7.Convenient operation, touch screen operation panel, LED light source inside the equipment, easy to observe the processing status of the workpiece.
8. The automatic deburring machine has different combinations of grinding heads, which are for different requirements of workpieces.For laser cutting stamping parts,it can do deoxidizing, grinding, deburring, polishing and edge rounding.
Machine Parameters