R station

Wide belt

Abrasive cloth belt

Abrasive cloth belt is used for preliminary grinding of metal sheets. In the case of preliminary removal of burrs, 80 and 120 grits are usually used, and the materials are available in alumina, zirconium corundum, ceramic, silicon carbide, etc.

Non-woven belt

Non-woven belts for finishing polishing. Available in various grits, versions and belt dimensions. Used for the last R station


Wide Belt Deburring Machine

Available Wide Belt Combinations

ADV 508-R

  • Deburring, sanding, and finishing of flat metal sheets (aluminum, copper, stainless steel, etc.).

  • Removing longitudinal burrs from laser-cut, stamping, and water jet-cut workpieces.

  • Standard available widths are 450mm, 630mm, 800mm, 1000mm, 1300mm, 1600mm or customized.

  • The metal sander can be used for wet or dry processes.

ADV 508-RR

  • Deburring, sanding, and finishing of flat metal sheets (aluminum, copper, stainless steel, etc.).

  • Removing longitudinal burrs from laser-cut, stamping, and water jet-cut workpieces.

  • Standard available widths are 450mm, 630mm, 800mm, 1000mm, 1300mm, 1600mm or customized.

  • The metal finishing machine can be used for wet or dry processes.


ADV 508-6R300

  • The surface polishing machine is suitable for polishing workpieces of different materials and shapes (sheet metal, flat bar, square pipes, etc.)

  • Flat metal products are polished using high-speed rotating sanding belts and grinding fluid.

  • The surface polishing machine can achieve fine polishing of the workpiece surface by accurately controlling the gap and pressure between the sanding belt and the workpiece, ensuring stable and consistent product surface quality.

Chat with us