This equipment is a through-type processing. The purpose is to remove burrs and edge rounding
The wide sanding belt mechanism removes slag particles, large flanges and other large burrs on the surface of the workpiece first
Finally, the sand block assembly is used. The sand block assembly rotates at high speed to remove burrs on the edge and inner hole of the workpiece and produce a uniform R angle
Metal deburring machine for stainless steel, steel and other metal
Deburring
Edge rounding
Finishing
Parameter:
Model
ADV 508-HR800
ADV 508-HR1100
ADV 508-HR1300
ADV 508-HR1500
Effective processing width (mm)
30-800
30-1100
30-1300
30-1500
Processing thickness (mm)
0.5-100
0.5-100
0.5-100
0.5-100
Minimum workpiece size
Magnetic suction 30*30 mm, Vacuum suction 50*50 mm
Abrasive belt linear speed (m/s)
3-15
3-15
3-15
3-15
Abrasive belt size (mm)
2000*820
2200*1120
2200*1320
2200*1520
Conveying speed (m/s)
0.5-7
0.5-7
0.5-7
0.5-7
Sand block speed (r/s)
5-12
5-12
5-12
5-12
Sand block motor power
2.2 kw*2
4 kw*2
5.5 kw*2
7.5 kw*2
Abrasive belt motor power
15 kw
18.5 kw
22 kw
22 kw
Conveying motor power
2.2 kw
2.2 kw
2.2 kw
2.2 kw
Sand block size
50*50 mm
50*50 mm
50*50 mm
50*50 mm
Available abrasives:
Wide belt: the burrs removal of metal sheets cut by laser, punching and shearing
Sand block: remove minor burrs and uniform edge rounding
Function of ADV 508-RS deburring machine
This equipment is a combination model of dry sanding belt and sand block. Mainly used to deal with deburring and edge rounding functions.
To deburr the edges and holes of the workpiece, this equipment is equipped with 2 sets of sand block structure.
The sand block abrasive rotates at a high speed to beat the surface of the workpiece, so that the contour edges around the workpiece surface and in the hole are smooth and rounded, resulting in rounded corners.
The abrasive belt station realizes the processing of grinding, descaling and finishing of the metal sheet surface.
For the burrs generated in the process of stamping, shearing, laser cutting, plasma cutting, etc., it can be removed in all directions at one time, so that all edges and holes of the workpiece can achieve a small R arc effect. The processing process is safe and reliable, so that the workpiece can achieve a perfect effect.
